Follow these easy steps to get your AEG LAVATHERM T3 Dryer up and running in no time.
Check that the appliance has not been damaged during transport. If damaged, contact your dealer and do not connect a damaged appliance.
Install the dryer in a room where the temperature is between 0 and +35°C. Ensure the dryer is positioned horizontally and not on a thick pile carpet as this would prevent air from circulating freely through the ventilation slots.
Ensure the rated voltage and type of current indicated on the rating plate correspond to those at the installation site. A permanent connection must be carried out only by a qualified engineer.
If the appliance is installed near a gas, coal, or electric heater, an insulating non-inflammable panel must be inserted between the dryer and the heater.
Before the first drying cycle, wipe the drum of the dryer with a damp cloth.
The plug of the dryer must always be accessible.
Ensure the control panel and worktop are undamaged to prevent access to inner components.
Never start the appliance if the electrical supply cable is damaged. Unplug the appliance before any cleaning or maintenance operations.